Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 1382 / 2018

Port Mirroring and Monitoring Commands
page 34-10 OmniSwitch 6250 CLI Reference Guide November 2009
show port mirroring status
Displays the status of mirrored ports.
show port mirroring status [port_mirror_sessionid]
Syntax Definitions
port_mirror_sessionid Mirroring session identifier.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If a port mirroring session identifier is not specified with this command, then all port mirroring sessions
are displayed.
Examples
-> show port mirroring status
Session Mirror Mirror Unblocked Config Oper
Destination Direction Vlan Status Status
----------+----------+--------------+----------+----------+---------
6. 1/41 - NONE Enable Off
----------+----------+--------------+----------+----------+---------
Mirror
Source
----------+----------+--------------+----------+----------+---------
6. 1/20 bidirectional - Enable Off
6. 1/21 bidirectional - Enable Off
6. 1/22 bidirectional - Enable Off
6. 1/23 bidirectional - Enable Off
6. 1/24 bidirectional - Enable Off
6. 1/25 bidirectional - Enable Off
6. 1/26 bidirectional - Enable Off
6. 1/27 bidirectional - Enable Off
6. 1/28 bidirectional - Enable Off
6. 1/29 bidirectional - Enable Off
6. 1/30 bidirectional - Enable Off
output definitions
Session The port mirroring session identifier.
Mirror Destination The location of the mirrored port.
Mirror Direction The direction of the mirroring or mirrored port, which can be
bidirectional (the default), inport , or outport .
Unblocked VLAN The mirroring VLAN ID number.