Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 1337 / 2018

DHCP Relay Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 32-61
show ip udp relay statistics
Displays the current statistics for each UDP port relay service. These statistics include the name of the
service, the forwarding VLAN(s) configured for that service, and the number of packets the service has
sent and received.
show ip udp relay [BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port]
Syntax Definitions
BOOTP BOOTP/DHCP well-known ports 67/68.
NBDD NBDD well-known port 138.
NBNSNBDD NBNS/NBDD well-known ports 137/138.
DNS DNS well-known port 53.
TACACS TACACS well-known port 65.
TFTP TFTP well-known port 69.
NTP NTP well-known port 123.
port A user-specified port that is not a well-known port.
Defaults
By default, the statistics for all UDP services is shown.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Enter a service name or port number with this command to display information about an individual
service.
•
When specifying a port number, do not specify a well-known port number. Instead, use the service
name for the well-known port (i.e., NBNS/NBDD, DNS, etc.).
Examples
-> show ip udp relay statistics
Service Vlan Pkts Sent Pkts Recvd
---------------+--------+------------+----------
BOOTP 0 0
DNS 2 10 10
4 15 15
TACACS 3 0 0