Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 1273 / 2018

RDP Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 31-17
show ip router-discovery interface
Displays the current RDP status, related parameter values, and RDP traffic statistics for one or more
switch router interfaces.
show ip router-discovery interface [name]
Syntax Definitions
name The IP interface name that was defined at the time the IP interface was
configured.
Defaults
By default, the information for all RDP interfaces is displayed with this command.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
When an optional IP interface name is specified with this command, additional information about the
RDP interface is displayed.
•
Use the show ip router-discovery command to display global RDP status and statistics for the entire
switch.
Examples
-> show ip router-discovery interface
IP i/f RDP i/f Next #Pkts
Name status status Advt sent/recvd
---------------------+--------+--------+------+---------
Marketing Disabled Enabled 9 0 0
Accounting Disabled Enabled 3 0 0
output definitions
Name The user-defined IP interface name defined at the time the IP interface
was configured.
IP i/f status The IP status for this interface ( Enabled or Disabled) .
RDP i/f status The RDP status for this interface ( Enabled or Disabled ).
Next Advt Time remaining until the next advertisement is sent.
#Pkts sent/recvd Number of advertisement packets sent from this interface; the number
of solicitation packets received on this interface.