Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 119 / 2018

Chassis MAC Server (CMS) Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 3-9
show mac-range alloc
Displays all allocated addresses from the MAC range table.
show mac-range [index] alloc
Syntax Definitions
index Identifies the MAC range by referring to its position in the MAC range
table. Currently, index position 1 only is supported.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If you are assigning VLAN router ports while the switch is in single MAC router mode , all VLAN router
ports will use the base chassis MAC address (ID value 0).
Examples
-> show mac-range alloc
Range Mac Address Application Id
-----+-----------------+--------------------+---
01 00:d0:95:6b:09:40 CHASSIS 0
01 00:d0:95:6b:09:41 802.1X 0
01 00:d0:95:6b:09:5f CHASSIS 1
output definitions
Range The MAC range’s index number. The index number refers to the posi-
tion of the range in the MAC range table. Values may range from
1–20. MAC ranges are divided by index number into four distinct cate-
gories. Refer to
page 3-7 for more information.
Mac Address Current MAC address allocated for a specific application.