Alcatel-Lucent Data Multiplexer Explore 1665, Installation Manual, Page: 67 / 408

DS1 cable installation Equipment and cable installation for 1665 Data Multiplexer
(1665 DMX)
............................................................................................................................................................................................................................................................
365-372-304R7.1
Issue 1, November 2007
1 - 3 7
Table 1-4 DS1 cable assemblies
Cable length
(feet) Cable
assembly #
Description
1665 DMX
backplane
connections
10 848954988 DS1 Cables, 24 gauge J1, J24 - J2, J20
(A OUT - A IN)
J3, J25 - J4, J21
(B OUT - B IN)
J6, J26 - J5, J22
(C OUT - C IN)
J8, J27 - J7, J23
(D OUT - D IN)
20 848955001
30 848923074
50 848548327
75 848923082
100 848548335
125 848923090
150 848548343
175 848923108
200 848923116
250 848548350
350 848790762
450 848548368
550 848790770
655 848790788
Notes:
1. Each group listed includes all the DS1 cables for one function group.
2. One code provides one input and one output cable for 28 DS1's, i.e., for one
DS1 function group, e.g, "J1 A OUT" & "J2 A IN"
3. For Input connections use cable CA1 (DS1 IN) and for Output connections use
cable CA2 (DS1 OUT).
4. Cables are terminated in J1 through J8 and J20 through J27 connectors at the
1665 DMX High-Capacity shelf
end and unterminated at the other end for
wire-wrap installation.
5. P1 through P8 are 62 pins D-Sub male-type connectors fit into J1 through J8.
P20 through P27 are 62 pins DSUB male type connectors fit into J20 through
J27.
6. Two codes required for the high-capacity 56 DS1 LNW8, i.e., for DS1 function
groups, e.g., "J1 A OUT" & "J2 A IN" and "J24 A OUT"&"J20 A IN"