Alcatel-Lucent Data Multiplexer Explore 1665, Installation Manual, Page: 65 / 408

DS1 cable installation Equipment and cable installation for 1665 Data Multiplexer
(1665 DMX)
............................................................................................................................................................................................................................................................
365-372-304R7.1
Issue 1, November 2007
1 - 3 5
........................................................................................................................................................................................................................
2
Connect the function group cables at the 1665 DMX High-Capacity shelf end, carefully
matching the correct connector with the appropriate backplane connectors as shown in
Figure 1-12, “DS1 cable installation” (p. 1-35) .
Important!
DS1 cable retaining screws must be tightened to a maximum of 6.5 in-lb.
Do not overtighten.
Figure 1-12 DS1 cable installation
........................................................................................................................................................................................................................
3 Route the cables along the backplane and out of the bay to the DSX per Figure 1-13, “DS1
cable routing” (p. 1-36) .
-48RTNA
-48VA
P14
J9
SYNC1
J15
FAN
J11
MISC
J14
SYNC2 P15
J17
MODEM
-48RTNB
-48VB
J16
IAOLAN
J19
INTEROP
J10
X.25
J18
DLAN
J12
ALM
J13
ALM
MULT
J4
B OU T
J2
A OU T
J3
B IN
J1
A IN
J8
D IN
J7
D OU T
J6
C IN
J5
C OU T
TO DSX-1 INTERFACE