Alcatel-Lucent Data Multiplexer Explore 1665, Installation Manual, Page: 43 / 408

1665 DMX High-Capacity shelf installation Equipment and cable installation for 1665 Data Multiplexer
(1665 DMX)
............................................................................................................................................................................................................................................................
365-372-304R7.1
Issue 1, November 2007
1 - 1 3
........................................................................................................................................................................................................................
5
Verify with an ohmmeter that the 1665 DMX High-Capacity shelf is grounded to the bay
frame. Measure between the 1665 DMX High-Capacity shelf mounting bracket and the
office ground lug on the bay frame.
Requirement: The ohmmeter reads less than 1 ohm.
........................................................................................................................................................................................................................
6
If the Ohmmeter reading is not less than 1 ohm, a secondary ground should be used for
each shelf. Use an 8 AWG wire from the UL (Green M5 Screw) safety ground on the side
of the shelf to bay frame or office ground.
Important!
It is important to remove the paint in the area where the wire is to be
connected to the bay and to apply no-ox before connecting the wire.
........................................................................................................................................................................................................................
7
Check off the appropriate box in Appendix E, “Installation checklist” .
........................................................................................................................................................
E
N D
O
F
S
T E P S