Alcatel-Lucent Data Multiplexer Explore 1665, Installation Manual, Page: 191 / 408

Installation tests
............................................................................................................................................................................................................................................................
365-372-304R7.1
Issue 1, November 2007
4 - 3
2 or 3 15-dB LC-type LBO
(108279480) Two 15-dB LBOs are required when optically
looping the
1665 DMX
shelf for test
purposes.In addition, for shelves containing
optical circuit packs in any of the Function Unit
slots, a single 15-dB LBO is required for testing
of the individual ports.
2 20-dB LC-type LBO
(108279530) Two 20-dB LBOs are required when optically
looping the
1665 DMX
shelf equipped with
LNW60.
1 Personal Computer (PC) Required to run the WaveStar
®
CIT software.
See Chapter 3, “Software download and circuit
pack installation” , PC minimum requirements
(p. 3-2) .
1 CIT Interface Cable 8-ft. long RJ45 to 9-pin D-sub serial cable
(Comcode 848748869). Required to connect the
PC to the CIT jack on the front of the SYSCTL
circuit pack.
2 LAN 10BaseT Straight-
through Cable CAT 5 or better As required to reach from front of 1665 DMX to
the RJ45 patch panel
1 LAN 10BaseT Cross-over
Cable CAT 5 or better As required to reach from front of 1665 DMX to
the PC
Quantity Description Comments