Alcatel-Lucent Data Multiplexer Explore 1665, Installation Manual, Page: 190 / 408

............................................................................................................................................................................................................................................................
Installation tests
4 - 2
365-372-304R7.1
Issue 1, November 2007
Tools, test equipment and accessories
Listed below are the required tools, test equipment and accessories. For complete listing
see Part I or Part II.
OC-48 (low-speed) testing 4-52
LED test 4-56
Additional optical tests (optional) 4-57
Quantity Description Comments
Screwdriver(s) A screwdriver(s) with the appropriate head(s) is
(are) required for securing the mounting screws,
repositioning the mounting brackets, installing
the interfacing cables, and for setting the circuit
breakers to the OFF position.
1 ESD Wrist Strap A wrist strap must be worn when handling
circuit packs. Use the electrostatic discharge
(ESD) jack provided on the shelf.
1 DS1 Error Rate Test Set A DS1 error rate test set is required for testing
of DS1 cabling. A T-BERD 2209 or equivalent
is recommended.
1 DS3 Error Rate Test Set A DS3 error rate test set is required for testing
of DS3/EC1 and TMUX cabling. A T-BERD
2209 or equivalent is recommended.
1 SONET Optical Test Set An OC-3, OC-12 or OC-48 test set as required
for testing of optical circuit packs. An Agilent
OmniBER 718 or equivalent is recommended.
2 or 3 LC-type Optical Fiber Jumper
(108918269) Two optical fiber jumpers with LC-type
connectors are required to optically loop the
1665 DMX
shelf for test purposes.
In addition, for shelves containing optical
circuit packs in any of the Function Unit slots, a
single optical fiber jumper is required for testing
of the individual ports.