Alcatel-Lucent Data Multiplexer Explore 1665, Installation Manual, Page: 128 / 408

............................................................................................................................................................................................................................................................
CIT cable installation Equipment and cable installation for 1665 Data Multiplexer
(1665 DMX)
1 - 9 8
365-372-304R7.1
Issue 1, November 2007
Table 1-25 Standard CIT cable connections
Table 1-26 RJ-45 to DB-9 connector connections
Connection
RJ45 connector
Color
9-Pin D-type connector
Pin# Designation Pin# Designation
Front CIT cable 1 FRS232N W - O 6 DCE Ready
3 FDTR W - BL 4 DTE Ready
4 Ground W - G 5 Ground
5 FTXD O 2 Receive Data
6 FRXD G 3 Transmit Data
Notes:
1. The connection and the colors shown above are for a standard Lucent made cable. If
you use a RJ-45 to DB-9 connector with a standard straight-through 10BaseT LAN
cable, refer to
Table 1-26, “RJ-45 to DB-9 connector connections” (p. 1-98) .
From RJ45
connector To 9-pin D-type
connector
Pin# Color Pin#
1 Blue 6
3 Black 4
4 Red 5
5 Green 2
6 Yellow 3
Notes:
1. The connection and the colors shown above are for RJ-45 to
DB-9 connector.
2. This connector should be used with a standard straight-through
cable which has all 8 wires connected.