manualshive.com logo in svg

Alcatel-Lucent Data Multiplexer Explore 1665, Installation Manual, Page: 23 / 408

Share
Download
Alcatel-Lucent Data Multiplexer Explore 1665 Installation Manual Download Page 23

About this document

............................................................................................................................................................................................................................................................

365-372-304R7.1
Issue 1, November 2007

x x i i i

disposed of as part of unsorted municipal waste. Due to materials that may be contained in 
the product, such as heavy metals or batteries, the environment and human health may be 
negatively impacted as a result of inappropriate disposal.

Important!

In the European Union, a solid bar under the crossed-out wheeled bin 

indicates that the product was put on the market after 13 August 2005.

Moreover, in compliance with legal requirements and contractual agreements, where 
applicable, Alcatel-Lucent will offer to provide for the collection and treatment of Alcatel-
Lucent products at the end of their useful life. Alcatel-Lucent will also offer to provide for 
the collection and treatment of existing products displaced by Alcatel-Lucent equipment.

For information regarding take-back of equipment by Alcatel-Lucent, or for more 
information regarding the requirements for recycling/disposal of product, please contact 
your Alcatel-Lucent Account Manager or Alcatel-Lucent Take-Back Support at 

[email protected]

.

Summary of Contents for Data Multiplexer Explore 1665

























































































































































































































































































































































































































Reviews:

No comments