Alcatel-Lucent ALE-20 User Manual Download | Manualshive

Page: 19 / 73

background image

User Manual

8AL91432ENAAed01

19 /73

2

Using your telephone

2.1

Identify the terminal you are on

The number of your telephone is displayed on the 'Info' page.

2.2

Messaging portal

The messaging portal allows you to access and manage features such as the call log, instant messaging
and voice messages. When there is a new event (new log, new instant message or new voice message)
the message key blinks red.

Accessing the messaging portal

•

Press the message key to access the messaging portal.

Configure access to the messaging portal

The system default setting requires you to enter your personal password to access the messaging portal
features. The password information is retained for a few seconds so that if you quit the messaging portal
you can access it again after a few seconds without having to re-enter your password. The length of this
time-out depends on your system configuration. For more information, contact your installer or
administrator. You can change the setting so that you don't have to enter a password each time you want
to access the messaging portal features.

•

Access the messaging portal.

•

Configure

•

Authentification

•

Enter your personal password.

•

Set authentication to on or off.
On: password is always required.
Off: password is never required.

•

Press to confirm.

Accessing the features of the messaging portal

To access the available features (call log, instant messages IM, voice messages, sending an instant
message), press the associated softkey.

Acknowledging

When you consult a new event (call log, instant message or voice message), the event is automatically
acknowledged. However, you can choose to acknowledge all events without consulting them.

•

Access the messaging portal.

•

Press the associated softkey.

•

Enter your password (if required) and apply.

•

Press the softkey associated with the type of event you want to acknowledge. If you press

the key associated with the 'all' option, all new events are acknowledged. You can also
acknowledge all events if you press the softkey associated with the check icon in the top right
corner of the screen.

•

Press to confirm.

«
...
17
18
19
20
21
...
»

Summary of Contents for ALE-20










































































Reviews:

No comments

Related manuals for ALE-20

Brand: Yealink Pages: 4

Brand: Yealink Pages: 148

Brand: Yealink Pages: 2

Brand: Yealink Pages: 131

Brand: Yealink Pages: 159

Brand: Yealink Pages: 9

W56P Telesystem

Brand: Yealink Pages: 12

Verizon One Talk W60B

Brand: Yealink Pages: 8

Brand: Yealink Pages: 2

T46S Skype for Business

Brand: Yealink Pages: 2

Brand: Yealink Pages: 533

SRM9030plus Garioch

Brand: Scot-tel Garioch Pages: 2

Dusk2Dawn 2100-CD9 Series

Brand: Rath Pages: 8

Brand: Azumi Pages: 7

Brand: Spice Pages: 26

Brand: STK Professional Audio Pages: 1

8915 - Snapper Cell Phone

Brand: Snapper Pages: 66

Brand: T-Mobile Pages: 43

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands