Compliance
MU19006USA
D
-E
900
ed01-
08
43
howtoc
Independently of the legal warranty that covers this appliance, it is guaranteed for 1 year,
parts and labour, counting from the date indicated on your invoice.
The invoice will be demanded if making a claim under the warranty. The warranty does not
however apply in the following cases: in the event of use that does not comply with the
instructions given in this user’s manual, faults or damage caused by natural wear, damage
resulting from a cause external to the appliance (e.g. impact, fall, exposure to dampness,
etc.), noncompliant installation or modifications or repairs carried out by people who are
not approved by the manufacturer or retailer.
Warning: never place your telephone in contact with water. To clean your telephone, you
may however use a damp soft cloth. Never use solvents (trichlorethylene, acetone, etc.)
which may damage the plastic parts of your telephone. Never spray it with cleaning
products.
To avoid accidentally damaging the set telephone line connector, make sure you position
the cord correctly in the compartment intended for this purpose
The ear piece and microphone area of the handset may attract metallic objects that may
be dangerous for the ear.
The wording is not contractual and may be subject to change. Some functions of your
telephone are controlled by a software key and the configuration of the unit.
Declaration of compliance
We, Alcatel-Lucent Enterprise, declare that the products covered by this user guide are
compliant with the primary requirements of the Parliament and Council Directive 1999/5/
CE. A copy of the original of this declaration of compliance can be obtained from your
installer.
Consumption in standby: 3,5V.
Alcatel-Lucent IP Touch 4068 Phone & IP Touch Bluetooth® Wireless Handset
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. .
Operation is subject to the following two conditions : (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation..
Warning : changes or modifications made to this equipment not expressly approved by
Alcatel
-
Lucent Enterprise may void the FCC authorization to operate this equipment.
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance wit the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try correct the interference by consulting the dealer..
This Class B digital apparatus complies with Canadian ICES-003.
This device has been designed and manufactured not to exceed the SAR (Specific
Absorption Rate) radio frequency power transmission limits established by the different
countries concerned. The SAR value measured is equal to 0.0
025
W/kg (the globally
accepted maximum limit being 1.6 W/kg).
Information relative to the environment
This symbol indicates that at the end of its life, this product should be subject to
special collection and disposal in member countries of the European Union, as
well as in Norway and Switzerland. By ensuring this product is disposed of
correctly, you will help to conserve natural resources and help prevent potential
negative consequences to the environment and human health which could otherwise be
caused by inappropriate disposal of this product. For further details about recycling this
product, please contact the supplier who sold you the product.
Operating conditions
Operating temperature range: -5
°
C /45
°
C.
Acoustic shock protection
The acoustic level of the signal generated by the handset earpiece is less than 130 dBspl for
a transient signal (123 dBspl for Australia) and less than 118 dBspl (rms) for a continuous
signal (120 dBA for Australia).
Directive 2003/10/EC specifying the risks inherent in noise at work
The ring contributes towards overall daily noise; at its maximum setting, the level is 105
dBA at 60 cm from terminal. To reduce the level, the following is recommended:
- reduce the setting (9 levels of 5 dB)
- program a progressive ring.
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-
Lucent. All other trademarks are the property of their respective owners. The information
presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for
inaccuracies contained herein. Copyright © 2008 Alcatel-Lucent. All rights reserved