background image

Al

cat

el

-Lucent

 8

2

54

 D

E

C

T

 Ha

nds

et

 

 

 

 

 

User

 guide

 

 

Related Documentation - Other languages for these Safety and Regulatory Instructions and User Documentation are available at the following 
Web site: https://www.al-enterprise.com/products. 8AL90387ENAA - The Alcatel-Lucent name and logo are trademarks of Nokia used under 
license by ALE. ALE International copyright © 2020 

11

 

Declaration of compliance 

 

This equipment uses DECT frequency range that depends on country: 1880 - 1900 Mhz in Europe, 1920 - 
1930 MHz in US/Canada, 1910 - 1930 MHz in LATAM, 1910 - 1920 MHz in Brazil. The equivalent 
isotropically radiated power at the antenna is less than 110 mW or 250 mW (it depends on the country).  

EUROPE 

This equipment is in compliance with the essential requirements of Radio Equipment Directive (RED) 
2014/53/EU and with Directive 2011/65/EU (RoHS). 
Declaration of Conformity may be obtained from:  

ALE International 32 avenue Kléber 

– 92700 Colombes, France 

[email protected] 

USA and Canada 

Handset: This device complies with Part 15 of the FCC Rules and with RSS of Industry Canada (FCC ID: 
T7HCT8234 IC: 4979B-CT8234). This device complies with Part 68 of the FCC Rules and with IC CS-03 
Part V of Industry Canada. The ACTA registration number is: T7HW4NANCT8234. 
Chargers: This device complies with Part 15 of the FCC Rules and with ICES-003 of Industry Canada.  

Exposure to Radio Frequency Signals 

This device has been designed and manufactured not to exceed the SAR (Specific Absorption Rate) radio 
frequency power transmission limits established by the different countries concerned. The SAR value 
measured is equal to 0.05 W/kg (the globally accepted maximum limit being 1.6 W/kg). 

User Instructions 

Only use the handset in temperatures between -15°C to +55°C (5°F to 131°F). Do not charge a battery 
when the ambient room temperature is above 40º C or below 5º C (above 104º F or below 41 ºF). This 
apparatus is Hearing Aid Compatible (HAC). 

Acoustic shock protection 

Maximum sound pressure level for handset is compliant with European, US and Australian standards. 

Directive 2003/10/EC specifying the risks inherent in noise at work 

The ring contributes towards overall daily noise. To reduce the level, the following is recommended: reduce 
the setting, program a progressive ring. 

Disposal 

The equipment must be returned to a collection point for electronic equipment waste 
disposal. 
Defective batteries must be returned to a collection point for chemical waste disposal. 

Related Documentation 

Other languages for these Safety and Regulatory Instructions and User Documentation are 
available at the following Web site: https://www.al-enterprise.com/en/products. 

 
The Alcatel-Lucent name and logo are trademarks of Nokia used under license by ALE. To view other 
trademarks used by affiliated companies of ALE Holding, visit: www.al-enterprise.com/en/legal/trademarks-
copyright. All other trademarks are the property of their respective owners. The information presented is 
subject to change without notice. Neither ALE Holding nor any of its affiliates assumes any responsibility for 
inaccuracies contained herein. © 2019 ALE International. www.al-enterprise.com.2020.

 

 

 

 

 

 

 

 

 

Summary of Contents for 8254 DECT



































































Reviews: