manualshive.com logo in svg

Alcatel-Lucent 7950, Quality Of Service Manual, Page: 492 / 612

Share
Download
Alcatel-Lucent 7950 Quality Of Service Manual Download Page 492

Generic Commands

Page 492

7950 XRS Quality of Service Guide

Operational Commands

copy

Syntax

copy scheduler-policy 

src-name dst-name

 [

overwrite

]

copy port-scheduler-policy 

src-name dst-name 

[

overwrite

]

Context

config>qos

Description

This command copies existing QoS policy entries for a QoS policy to another QoS policy.

The 

copy

 command is a configuration level maintenance tool used to create new policies using existing 

policies. It also allows bulk modifications to an existing policy with the use of the 

overwrite

 keyword.

If 

overwrite

 is not specified, an error will occur if the destination policy exists.

Parameters

scheduler-policy 

src-name dst-name  — 

Indicates that the source policy and the destination policy are 

scheduler policy. Specify the source policy that the copy command will attempt to copy from and 
specify the destination policy to which the command will copy a duplicate of the policy. 

port-scheduler-policy 

src-name dst-name — 

Indicates that the source policy and the destination policy are 

port scheduler policy IDs. Specify the source policy that the copy command will attempt to copy from 
and specify the destination policy name to which the command will copy a duplicate of the policy. 

overwrite — 

Forces the destination policy name to be copied as specified. When forced, everything in the 

existing destination policy will be completely overwritten with the contents of the source policy. 

Summary of Contents for 7950





































































































































































































































































































































































































































































































































































































































Reviews:

No comments