manualshive.com logo in svg

Alcatel-Lucent 7950, Quality Of Service Manual, Page: 327 / 612

Share
Download
Alcatel-Lucent 7950 Quality Of Service Manual Download Page 327

Ingress and Egress Queue Group Creation and Redirection 

7950 XRS Quality of Service Guide

Page 327

Egress Network IP Interface Statistics

The statistics for network interfaces work differently than statistics on SAPs. Counter sets are 
created for each egress IP interface and not per egress queue. When a forwarding class for an 
egress IP interface is redirected from the default egress port queue to a queue group queue, the 
system continues to use the same counter set.

Separate Ingress IPv4 and IPv6 Statistics

This feature adds support for separate ingress IPv4 and IPv6 statistics on IP interfaces. IES and 
VPRN interfaces, and subscriber group interfaces on IES and VPRN, as well as for uRPF. In 
previous release, the ingress statistics for IPv4 and IPv6 traffic was combined into a single set of 
packet and bytes counters. The existing counters will now only count IPv4 traffic, while new 
separate counters are available to IPv6 traffic.

The feature introduces a new CLI command to explicitly enable ingress statistics on IP interfaces, 
changing the default to disabled.

Summary of Contents for 7950





































































































































































































































































































































































































































































































































































































































Reviews:

No comments