Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 445 / 502

Show Commands
7950 SR OS Basic System Configuration Guide Page 445
Rollback Location : cf1:/Rollback
Save
Last Rollback Save Result : In Progress, Successful or Failed
Last Save Completion Time : 10/15/2010 21:24:06
Revert
In Progress : Yes, No
Last Revert Initiated Time : 10/15/2010 21:26:23
Last Revert Initiated User : xyz
Last Initiated Checkpoint : cf1:/Rollback.rb.3
Last Completed Revert Result : Successful or Failed
Last Revert Completion Time : 10/15/2010 21:27:19
================================================================================
Rollback Files
================================================================================
Idx Suffix Creation time Release User
Comment
--------------------------------------------------------------------------------
latest .rb 2010/10/15 21:24:02 9.0.R4 fred
This checkpoint was saved after the 3 VPLS services were created
1 .rb.1 2010/10/15 21:23:58 9.0.R4 John
John’s checkpoint on Sunday
2 .rb.2 2010/10/15 21:23:52 9.0.R4 admin
A long checkpoint comment that an operator is using to summarize
various some of the changes that were made. They may even have so
much to say that they use the maximum comment size. Notice that
words are not chopped.
…
9 .rb.9 2010/10/14 22:00:01 9.0.R4 admin
VPLS services 1000-2000 created
…
53 .rb.53 2010/10/14 22:10:10 9.0.R4 admin
--------------------------------------------------------------------------------
No. of Rollback Files: 10
================================================================================
sntp
Syntax sntp
Context show>system
Description
This command displays SNTP protocol configuration and state.
Output Show SNTP Output —
The following table describes SNTP output fields.
Label Description
SNTP Server
The SNTP server address for SNTP unicast client mode.
Version
The SNTP version number, expressed as an integer.