Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 304 / 502

Display-config
Page 304 7950 SR OS Basic System Configuration Guide
Post-Boot Configuration Extension Files
Two post-boot configuration extension files are supported and are triggered when either a
successful or failed boot configuration file is processed. The commands specify URLs for the CLI
scripts to be run following the completion of the boot-up configuration. A URL must be specified
or no action is taken. The commands are persistent between router (re)boots and are included in
the configuration saves (
admin>save
).
CLI Syntax:
config>system
boot-bad-exec file-url
boot-good-exec file-url
Example
:
config>system# boot-bad-exec ftp://test:test@192.168.xx.xxx/./
fail.cfg
config>system# boot-good-exec ftp://test:test@192.168.xx.xxx/./
ok.cfg
The following example displays the command output:
A:ALA-12>config>system# info
#------------------------------------------
echo "System Configuration"
#------------------------------------------
name "ALA-12"
contact "Fred Information Technology"
location "Bldg.1-floor 2-Room 201"
clli-code "abcdefg1234"
coordinates "N 45 58 23, W 34 56 12"
config-backup 7
boot-good-exec "ftp://test:test@192.168.xx.xxx/./ok.cfg"
boot-bad-exec "ftp://test:test@192.168.xx.xxx/./fail.cfg"
lacp-system-priority 1
sync-if-timing
begin
ref-order ref1 ref2 bits
..
----------------------------------------------
A:ALA-12>config>system#