Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 265 / 502

System Management
7950 SR OS Basic System Configuration Guide Page 265
System Information Parameters
Name
Use the
syst
em command to configure a name for the device. The name is used in the prompt
string. Only one system name can be configured, if multiple system names are configured the last
one encountered overwrites the previous entry. Use the following CLI syntax to configure the
system name:
CLI Syntax:
config>system
name system-name
Example
:
alcatel>config>system# name ALA-12
The following example displays the system name:
sysName@domain >config>system# info
#------------------------------------------
echo "System Configuration "
#------------------------------------------
name " ALA-12 "
. . .
exit
----------------------------------------------
sysName@domain >config>system#
Contact
Use the
contact
command to specify the name of a system administrator, IT staff member, or
other administrative entity.
CLI Syntax:
config>system
contact contact-name
Example
:
config>system# contact “Fred Information Technology”