Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 157 / 502

Root Commands
7950 SR OS Basic System Configuration Guide Page 157
Queueing Stats(Egress QoS Policy 1)
Dro. InProf : 0 0
Dro. OutProf : 0 0
For. InProf : 0 0
For. OutProf : 0 0
-------------------------------------------------------------------------------
Sap per Queue Stats
-------------------------------------------------------------------------------
Packets Octets
Ingress Queue 1 (Unicast) (Priority)
Off. HiPrio : 0 0
Off. LoPrio : 0 0
Dro. HiPrio : 0 0
Dro. LoPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
sdp
Syntax sdp { sdp-id | far-end ip-address } [ interval seconds ] [ repeat repeat ] [ absolute | rate ]
Context monitor>service>id service-id
Description
This command monitors statistics for a SDP binding associated with this service.
Parameters
sdp-id — Specify the SDP identifier.
Values
1 — 17407
far-end ip-address — The system address of the far-end SR OS router for the SDP in dotted decimal
notation.
interval seconds — Configures the interval for each display in seconds.
Default
11 seconds
Values
11 — 60
repeat repeat — Configures how many times the command is repeated.
Default
10
Values
1 — 999
absolute — When the absolute keyword is specified, the absolute rate-per-second value for each statistic is
displayed.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead of the
delta.
Sample Output
A:ALA-12# monitor service id 100 sdp 10 repeat 3
===============================================================================
Monitor statistics for Service 100 SDP binding 10