Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 114 / 502

Basic CLI Commands
Page 114 7950 SR OS Basic System Configuration Guide
Monitor CLI Commands
ccag
Syntax ccag ccag-id [ path { a | b }] [ type { sap-sap | sap-net | net-sap }] [ interval seconds ] [ repeat repeat ]
[ absolute | rate ]
Context monitor
Description
Displays monitor command output of traffic statistics for Cross Connect Aggregation Groups (CCAGs)
ports.
Parameters
ccag-id — Specifies the CCAG instance to monitor.
path — Specifies the CCA path nodal context where the CCA path bandwidth, buffer and accounting
parameters are maintained. The path context must be specified with either the a or b keyword
specifying the CCA path context to be entered.
type — Specify cross connect type.
Values
sap-sap , sap-net , net-sap
interval — Configures the interval for each display in seconds.
Default
5 seconds
Values
3 — 60
repeat repeat — Configures how many times the command is repeated.
Default
10
Values
1 — 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without processing.
No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead of
the delta.
cpm-filter
Syntax cpm-filter
Context monitor
Description
Displays monitor command output for CPM filters.
ip