Alcatel-Lucent 7950 SR, System Management Manual, Page: 79 / 462

Security
7950 SR OS System Management Guide Page 79
Configuring RADIUS Authorization
In order for RADIUS authorization to function, RADIUS authentication must be enabled first. See
Configuring RADIUS Authentication on page 78 .
In addition to the local configuration requirements, VSAs must be configured on the RADIUS
server. See
Vendor-Specific Attributes (VSAs) on page 45 .
On the local router, use the following CLI commands to configure RADIUS authorization:
CLI Syntax:
config>system>security
radius
authorization
The following displays a RADIUS authorization configuration example:
A:ALA-1>config>system>security# info
----------------------------------------------
...
radius
authorization
retry 5
timeout 5
server 1 address 10.10.10.103 secret "test1"
server 2 address 10.10.0.1 secret "test2"
server 3 address 10.10.0.2 secret "test3"
server 4 address 10.10.0.3 secret "test4"
exit
...
----------------------------------------------
A:ALA-1>config>system>security#