Alcatel-Lucent 7950 SR, System Management Manual, Page: 393 / 462

Event and Accounting Logs
7950 SR OS System Management Guide Page 393
to memory
Syntax to memory [ size ]
Context config>log>log-id log-id
Description
This command specifies a log ID destination. This parameter is mandatory when configuring a log
destination. This command instructs the events selected for the log ID to be directed to a memory log.
A memory file is a circular buffer. Once the file is full, each new entry replaces the oldest entry in the
log.
The source of the data stream must be specified in the from command prior to configuring the
destination with the to command.
The to command cannot be modified or re-entered. If the destination or maximum size of an SNMP
or memory log needs to be modified, the log ID must be removed and then re-created.
Default
none
Parameters
size — The size parameter indicates the number of events that can be stored in the memory.
Default
100
Values
50 — 1024
to session
Syntax to session
Context config>log>log-id log-id
Description
This command specifies a log ID destination. This parameter is mandatory when configuring a log
destination. This command instructs the events selected for the log ID to be directed to the current
console or telnet session. This command is only valid for the duration of the session. When the
session is terminated the log ID is removed. A log ID with a
session destination is not saved in the
configuration file.
The source of the data stream must be specified in the from command prior to configuring the
destination with the to command.
The to command cannot be modified or re-entered. If the destination or maximum size of an SNMP
or memory log needs to be modified, the log ID must be removed and then re-created.
Default
none