Alcatel-Lucent 7950 SR, System Management Manual

Page: 380 / 462

Log Filter Entry Match Commands
Page 380 7950 SR OS System Management Guide
regexp — Specifies the type of string comparison to use to determine if the log event matches the
value of router command parameters. When the regexp keyword is specified, the string in the
router command is a regular expression string that will be matched against the subject string in
the log event being filtered.
severity
Syntax severity { eq | neq | lt | lte | gt | gte } severity-level
no severity
Context config>log>filter>entry>match
Description This command adds an event severity level as a match criterion. Only one severity command can be
entered per event filter entry. The latest severity command overwrites the previous command.
The no form of the command removes the severity match criterion.
Default
no severity — No severity level match criterion is specified.
Parameters
eq | neq | lt | lte | gt | gte — This operator specifies the type of match. Valid operators are listed in
the table below.
severity-name — The ITU severity level name. The following table lists severity names and
corresponding numbers per ITU standards M.3100 X.733 & X.21 severity levels.
Values
cleared, intermediate, critical, major, minor, warning
Operator Notes
eq equal to
neq not equal to
lt less than
lte less than or equal to
gt greater than
gte greater than or equal to
Severity Number Severity Name
1 cleared
2 indeterminate (info)
3 critical
4 major
5 minor
6 warning