Alcatel-Lucent 7950 SR, System Management Manual

Page: 379 / 462

Event and Accounting Logs
7950 SR OS System Management Guide Page 379
number
Syntax number { eq | neq | lt | lte | gt | gte } event-id
no number
Context config>log>filter filter-id >entry entry-id >match
Description
This command adds an SR OS application event number as a match criterion.
SR OS event numbers uniquely identify a specific logging event within an application.
Only one number command can be entered per event filter entry. The latest number command
overwrites the previous command.
The no form of the command removes the event number as a match criterion.
Default no event-number — No event ID match criterion is specified.
Parameters eq | neq | lt | lte | gt | gte — This operator specifies the type of match. Valid operators are listed in the
table below. Valid operators are:
event-id — The event ID, expressed as a decimal integer.
Values
1 — 4294967295
router
Syntax router { eq | neq } router-instance [ regexp ]
no router
Context config>log>filter>entry>match
Description
This command specifies the log event matches for the router.
Parameters
eq — Determines if the matching criteria should be equal to the specified value.
neq — Determines if the matching criteria should not be equal to the specified value.
router-instance — Specifies a router name up to 32 characters to be used in the match criteria.
Operator Notes
eq equal to
neq not equal to
lt less than
lte less than or equal to
gt greater than
gte greater than or equal to