Alcatel-Lucent 7950 SR, System Management Manual

Page: 129 / 462

Security
7950 SR OS System Management Guide Page 129
Defined by ITU-T Y.1731 32 - 63
Defined by IEEE 802.1. 64 - 255
Default no cfm-opcode
Parameters opcode — Specifies the opcode checking to be performed.
start — specifies the start number.
Values 0 — 255
end — Specifies the end number.
Values 0 — 255
lt|gt|eq — keywords
dot1p
Syntax dot1p dot1p-value [ dot1p-mask ]
Context config>system>security>mgmt-access-filter>mac-filter>entry>match
Description This command configures Dot1p match conditions.
Parameters dot1p-value — The IEEE 802.1p value in decimal.
Values 0 — 7
mask — This 3-bit mask can be configured using the following formats:
Values 0 — 7
dsap
Syntax dsap dsap-value [ dsap-mask ]
Context config>system>security>mgmt-access-filter>mac-filter>entry>match
Description
This command configures dsap match conditions.
Parameters dsap-value — The 8-bit dsap match criteria value in hexadecimal.
Values 0x00 — 0xFF (hex)
Format Style Format Syntax Example
Decimal
D 4
Hexadecimal
0xH 0x4
Binary
0bBBB 0b100