Alcatel-Lucent 7750 SR OS, Interface Configuration Manual

Page: 228 / 444

Configuration Commands
Page 228 7750 SR OS Interface Configuration Guide
hsmda-scheduler-overrides
Syntax [ no ] hsmda-scheduler-overrides
Context config>port>ethernet
Description This command enables the context to configure ingress and egress HSMDA scheduler override
parameters. Executing hsmda-scheduler-override places the current CLI context into the egress
scheduler override node either at the ingress MDA or egress port level.
Default values are:
Values
Command Configuration
description no description
max-rate no max-rate
group group 1 rate max
group 2 rate max
scheduling-class scheduling-class 1 rate max
scheduling-class 2 rate max
scheduling-class 3 rate max
scheduling-class 4 rate max
scheduling-class 5 rate max
scheduling-class 6 rate max
scheduling-class 7 rate max
scheduling-class 8 rate max
The no form of the command removes the overridden parameters from the HSMDA egress port
or ingress MDA scheduler. Once existing overrides are removed, the scheduler reverts all sched-
uling parameters back to the parameters defined on the hsmda-scheduler-policy associated with
the egress port or ingress MDA.
group
Syntax group group-id rate rate
no group group-id
Context config>port>ethernet>hsmda
config>card>mda>ingress>hsmda-scheduler-override
Description
This command changes the maximum rate allowed for a weighted scheduling group on the local
HSMDA scheduler. Scheduling classes within the group are managed with an aggregate rate limit
when either an explicit group rate is defined on the HSMDA scheduling policy or a local override is
defined based on the group override command.
The no form of the command removes the local overrides for the weighted scheduling group. Once
removed, the defined behavior within the HSMDA scheduling policy for the weighted scheduling
group is used.
Parameters group-id — Identifies the two weighted scheduling groups to be overridden.
Values 1, 2