Alcatel-Lucent 7750 SR-OS, Configuration Manual

Page: 491 / 674

Filter Policies
7750 SR OS Router Configuration Guide Page 491
shared-radius-filter-wmark
Syntax shared-radius-filter-wmark low low-watermark high high-watermark
no shared-radius-filter-wmark
Context config>filter>ip-filter
config>filter>ipv6-filter
Description
This command configures the low and high watermark for the number of RADIUS shared filters
reporting
Parameters
low low-watermark — Specifies the utilization of the filter ranges for filter entry insertion, at which a
table full alarm will be raised by the agent.
Values
0 — 8000
high high-watermark — Specifies the utilization of the filter ranges for filter entry insertion, at which
a table full alarm will be cleared by the agent.
Values
1— 8000
sub-insert-credit-control
Syntax sub-insert-credit-control start-entry entry-id count count
no sub-insert-credit-control
Context config>filter>ip-filter
config>filter>ipv6-filter
Description
This command inserts point information for credit control for the filter.
The no form of the command reverts to the default.
Default none
Parameters entry entry-id — Identifies a filter on this system.
Values 1 — 65535
count count — Specifies the count.
Values 1 — 65535
sub-insert-radius
Syntax sub-insert-radius start-entry entry-id count count
no sub-insert-radius
Context config>filter>ip-filter
config>filter>ipv6-filter
Description This command insert point information for RADIUS for the filter.