Alcatel-Lucent 7750 SR-OS, Configuration Manual

Page: 297 / 674

IP Router Configuration
7750 SR OS Router Configuration Guide Page 297
Parameters
ip-address — Only displays the interface information associated with the specified IP address.
Values
ipv4-address a.b.c.d (host bits must be 0)
ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
ip-int-name — Only displays the interface information associated with the specified IP interface name.
Values
32 characters maximum
packet
Syntax packet [ ip-int-name | ip-address ] [ headers ] [ protocol-id ]
no packet [ ip-int-name | ip-address ]
Context debug>router>ip
Description
This command enables debugging for IP packets.
Parameters
ip-int-name — Only displays the interface information associated with the specified IP interface name.
Values
32 characters maximum
ip-address — Only displays the interface information associated with the specified IP address.
headers — Only displays information associated with the packet header.
protocol-id — Specifies the decimal value representing the IP protocol to debug. Well known protocol
numbers include ICMP(1), TCP(6), UDP(17). The no form the command removes the protocol
from the criteria.
Values
0 — 255 (values can be expressed in decimal, hexidecimal, or binary)
route-table
Syntax route-table [ ip-prefix / prefix-length ]
route-table ip-prefix / prefix-length longer
no route-table
Context debug>router>ip
Description
This command configures route table debugging.
Parameters
ip-prefix — The IP prefix for prefix list entry in dotted decimal notation.
Values
ipv4-prefix a.b.c.d (host bits must be 0)
ipv4-prefix-length 0 — 32
ipv6-prefix x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x:
[0 — FFFF]H