Alcatel-Lucent 7710 SR SONET, Configuration Manual

Page: 286 / 496

SONET/SDH Port Commands
Page 260 7710 SR OS Interface Configuration Guide
framing
Syntax framing { sonet | sdh }
Context config>port>sonet-sdh
Description
This command specifies SONET/SDH framing to be either SONET or SDH.
Default
sonet
Parameters
sonet — Configures the port for SONET framing.
sdh — Configures the port for SDH framing.
group
Syntax group sonet-sdh-index payload { tu3 | vt2 | vt15 }
Context config>port>sonet-sdh
Description
This command configures payload of the SONET/SDH group.
For example:
config>port>sonet-sdh#
group tug3-1.1 payload tu3
group tug3-1.2 payload vt2
group tug3-1.3 payload vt2
group tug3-2.1 payload vt15
group tug3-2.2 payload vt15
group tug3-2.3 payload tu3
group tug3-3.1 payload tu3
group tug3-3.2 payload tu3
group tug3-3.3 payload tu3
Default none
Parameters sonet-sdh-index — Specifies the components making up the specified SONET/SDH path. Depending on the
type of SONET/SDH port the sonet-sdh-index must specify more path indexes to specify the payload
location of the path.
tu3 — Specify the Tributary Unit Group (TUG3) on a path. Configures the port or channel for transport
network use.
vt2 — Configures the path as a virtual tributary group of type vt2.
vt15 — Configures the path as a virtual tributary group of type vt15.