Alcatel-Lucent 7710 SR SONET, Configuration Manual

Page: 222 / 496

General Port Commands
Page 196 7710 SR OS Interface Configuration Guide
ber-sf-link-down
Syntax [ no ] ber-sf-link-down
Context config>port>tdm>ds1>channel-group>ppp
config>port>tdm>e1>channel-group>ppp
Description
This command enables the port down on BER-SF alarm. When enabled, the link will be placed out of
service once ber-sf is detected.
The no form of the command reverts to normal operation where the link remains in-service when ber-sf is
encountered.
Default no ber-sf-link-down
report-alarm
Syntax [ no ] report-alarm [ ais ] [ los ] [ oof ] [ rai ] [ looped ]
Context config>port>tdm> ds3
config>port>tdm> e3
Description This command enables logging of DS-3 and E-3 alarms for a DS-3/E-3 port or channel.
The no form of this command disables logging of the specified alarms.
Parameters
ais — Reports alarm indication signal errors. When configured, ais alarms are not raised and cleared.
Default ais alarms are issued
los — Reports loss of signal errors. When configured, los traps are not raised and cleared.
Default
los traps are issued.
oof — Reports out-of-frame errors. When configured, oof alarms are not raised and cleared.
Default oof alarms are not issued.
rai — Reports resource availability indicator events. When configured, rai events are not raised and
cleared.
Default
rai alarms are not issued
looped — Reports looped packets errors.
Default
looped alarms are not issued
scramble
Syntax [ no ] scramble
Context config>port>tdm>ds1>channel-group
config>port>tdm>ds3
config>port>tdm>e1>channel-group