Alcatel-Lucent 7710 SR SONET, Configuration Manual

Page: 156 / 496

Configuring Ports
Page 142 7710 SR OS Interface Configuration Guide
Configuring Channelized Ports
• Configuring Cisco HDLC on a Channelized Port on page 160
When configuring channelized ports, the port ID is specified in different ways depending on the
MDA type and level of channelization. Ethernet ports cannot be channelized.
The 7710 SR supports a channelized DS1 card (c8-chds1). The channelization is as follows:
N*DS0 in DS1 port.{1..24}
N*DS0 in E1 port.{1..32}
A port ID for channels has one of the following syntax as applicable to channelization and
mapping options where the port configuration syntax is slot/mda/port (
Table 26 ):
Table 18: Channelized Port Syntax Examples
PortID for Physical Port Speed
Channel speed OC12/STM4 OC3/STM1
SONET/SDH
STS12/STM4 port.sts12 N/A
STS3/STM1 port.sts3-{1..4} port.sts3
STS1/STM0 port.sts1-{1..4}.{1..3} port.sts1-{1..3}
TUG3 port.tug3-{1..4}.{1..3} port.tug3-{1..3}
TU3 port.tu3-{1..4}.{1..3} port.tu3-{1..3}
VT15/VC1.1 port.vt15-{1..4}.{1..3}.{1..4}.{1..7} port.vt15-{1..3}.{1..4}.{1..7}
VT2/VC12 port.vt2-{1..4}.{1..3}.{1..3}.{1..7} port.vt2-{1..3}.{1..3}.{1..7}
TDM
DS3/E3 port.{1..4}.{1..3} port.{1..3}
DS1 in DS3 port.{1..4}.{1..3}.{1..28} port.{1..3}.{1..28}
DS1 in VT2 port.{1..4}.{1..3}.{1..3}.{1..7} port.{1..3}.{1..3}.{1..7}
DS1 in VT15 port.{1..4}.{1..3}.{1..4}.{1..7} port.{1..3}.{1..4}.{1..7}
E1 in DS3 port.{1..4}.{1..3}.{1..21} port.{1..3}.{1..21}
E1 in VT2 port.{1..4}.{1..3}.{1..3}.{1..7} port.{1..3}.{1..3}.{1..7}
N*DS0 in DS1 in DS3 port.{1..4}.{1..3}.{1..28}.{1..24} port.{1..3}.{1..28}.{1..24}
N*DS0 in DS1 in VT2 port.{1..4}.{1..3}.{1..3}.{1..7}.{1..24} port.{1..3}.{1..3}.{1..7}.{1..24}
N*DS0 in DS1 in VT15 port.{1..4}.{1..3}.{1..4}.{1..7}.{1..24} port.{1..3}.{1..4}.{1..7}.{1..24}
N*DS0 in E1in DS3 port.{1..4}.{1..3}.{1..21}.{2..32} port.{1..3}.{1..21}.{2..32}
N*DS0 in E1in VT2 port.{1..4}.{1..3}.{1..3}.{1..7}.{2..32} port.{1..3}.{1..3}.{1..7}.{2..32}