Alcatel-Lucent 7710 SR SONET, Configuration Manual

Page: 136 / 496

Configuring Ports
Page 122 7710 SR OS Interface Configuration Guide
Ethernet Access Port
Services are configured on access ports used for customer-facing traffic. If a Service Access Port
(SAP) is to be configured on a port, it must be configured as access mode. When a port is
configured for access mode, the appropriate encapsulation type can be specified to distinguish the
services on the port. Once a port has been configured for access mode, multiple services may be
configured on the port.
The following example displays an Ethernet access port configuration:
A:ALA-A>config>port# info
----------------------------------------------
description " Ethernet access port "
access
egress
pool
slope-policy "slopePolicy1"
exit
exit
exit
network
egress
pool
slope-policy "slopePolicy2"
exit
exit
exit
ethernet
mode access
encap-type dot1q
exit
no shutdown
----------------------------------------------
A:ALA-A>config>port#
Configuring 802.1x Authentication Port Parameters
The following example displays an 802.1x port configuration:
A:ALA-A>config>port>ethernet>dot1x# info detail
----------------------------------------------
port-control auto
radius-plcy dot1xpolicy
re-authentication
re-auth-period 3600
max-auth-req 2
transmit-period 30
quiet-period 60
supplicant-timeout 30
server-timeout 30
----------------------------------------------