Configuration Commands
Page 316
7710 SR OS Interface Configuration Guide
src-mac
Syntax
src-mac
ieee-address
no src-mac
Context
config>redundancy>mc>peer>mcr>node>cv
Description
This command specifies the source MAC address used for the Ring-Node Connectivity Verification
of this ring node.
A value of all zeroes (000000000000 H (0:0:0:0:0:0)) specifies that the MAC address of the system
management processor (CPM) is used.
Default
no src-mac
Parameters
ieee-address —
Specifies the source MAC address.
vlan
Syntax
vlan
[
vlan-encap
]
no vlan
Context
config>redundancy>mc>peer>mcr>node>cv
Description
This command specifies the VLAN tag used for the Ring-node Connectivity Verification of this ring
node. It is only meaningful if the value of service ID is not zero. A zero value means that no VLAN
tag is configured.
Default
no vlan
Parameters
vlan-encap —
Specifies the VLAN tag.
Values
vlan-encap:
dot1q
qtag
qinq
qtag1.qtag2
qtag
0 — 4094
qtag1
1 — 4094
qtag2
0 — 4094
Summary of Contents for 7710 SR OS
