Alcatel-Lucent 7710 SR OS, Interface Configuration Manual

Page: 140 / 436

Service Management Tasks
Page 140 7710 SR OS Interface Configuration Guide
Deleting a Card
In order to delete the card type provisioned for a specific slot, you must shutdown existing port
configurations and shutdown and remove all MDA or CMA configurations. After removing MDA
configurations, you may shutdown and remove the MCM from service before modifying the card.
Note: CMAs do not require an MCM, therefore, if removing a CMA-type MDA from service, it is
not required to shutdown and remove an MCM before modifying the card:
Use the following CLI syntax to delete a card provisioned for a specific slot:
CLI Syntax:
config> port port-id
shutdown
CLI Syntax:
config> card slot-number
card-type card-type
mcm mcm-number
no mcm-type mcm-type
no shutdown
mda mda-number
no mda-type mda-type
no shutdown