Alcatel-Lucent 7705 SAR, System Management Manual

Page: 295 / 356

Event and Accounting Logs
7705 SAR OS System Management Guide 295
event-control
Syntax event-control [ application-id ] [ event-name | event-number ]
Context show>log
Description
This command displays event control settings for events, including whether the event is suppressed or
generated and the severity level for the event.
If no options are specified, all events, alarms and traps are listed.
Parameters
application-id — displays event control for the specified application only
Values
aps, atm, bgp, chassis, debug, dhcp, dot1ag, efm_oam, eth-cfm,
filter, ip, isis, ldp, logger, mpls, ntp, oam, ospf, port, ppp, ptp, rip,
qos, route_policy, rsvp, security, snmp, stp, svcmgr, system, user,
vrtr
Default
all applications
event-name — displays event control for the named application event only
Default
all events for the application
event-number — displays event control for the specified application event number only
Default
all events for the application
Output
The following output is an example of event control information, and Table 42 describes the fields.
Because the output is very large, only a sample of the events are shown here.
Sample Output
A:gal171# show log event-control
=======================================================================
Log Events
=======================================================================
Application
ID# Event Name P g/s Logged Dropped
-----------------------------------------------------------------------
ATM:
2004 tAtmTcSubLayerDown MI gen 0 0
2005 tAtmTcSubLayerClear MI gen 0 0
L 2006 atmVclStatusChange WA gen 0 0
...
CHASSIS:
2001 cardFailure MA gen 4 0
2002 cardInserted MI gen 3 0
2003 cardRemoved MI gen 8 0
2004 cardWrong MI gen 0 0
2005 EnvTemperatureTooHigh MA gen 0 0
2007 powerSupplyOverTemp CR gen 0 0
2008 powerSupplyAcFailure CR gen 0 0
2009 powerSupplyDcFailure CR gen 0 0
2010 powerSupplyInserted MA gen 0 0
2011 powerSupplyRemoved MA gen 0 0
2012 redPrimaryCPMFail CR gen 0 0