Alcatel-Lucent 7705 SAR System Management Manual Download Page 285

Page: 285 / 356

Event and Accounting Logs

7705 SAR OS System Management Guide

285

to file

Syntax

to file

log-file-id

Context

config>log>log-id

Description

This command is one of the commands used to specify the log ID destination. This parameter is
mandatory when configuring a log destination.

This command instructs the events selected for the log ID to be directed to a specified file.

The source of the data stream must be specified in the

from

command prior to configuring the

destination with the

command.

The

command cannot be modified or re-entered. If the log destination needs to be changed or if the

maximum size of an SNMP log or memory log needs to be modified, the log ID must be removed then
recreated.

Default

No destination is specified.

Parameters

log-file-id —

instructs the events selected for the log ID to be directed to the

log-file-id

. The

characteristics of the

log-file-id

referenced here must have already been defined in the

config

log

file-id

log-file-id

context.

Values

1 to 99

to memory

Syntax

to memory

[

size

]

Context

config>log>log-id

Description

This command is one of the commands used to specify the log ID destination. This parameter is
mandatory when configuring a log destination.

This command instructs the events selected for the log ID to be directed to a memory log. A memory
file is a circular buffer. Once the file is full, each new entry replaces the oldest entry in the log.

The source of the data stream must be specified in the

from

command prior to configuring the

destination with the

command.

The

command cannot be modified or re-entered.If the log destination needs to be changed or if the

maximum size of an SNMP log or memory log needs to be modified, the log ID must be removed then
recreated.

Default

No destination is specified.

Parameters

size —

indicates the number of events that can be stored in the memory log

Values

50 to 1024

Default

100

Summary of Contents for 7705 SAR




































































































































































































































































































































































Search results

Summary of Contents for 7705 SAR

Reviews:

Related manuals for 7705 SAR

Brands by name

Popular brands

Alcatel-Lucent 7705 SAR, System Management Manual

Search results

Summary of Contents for 7705 SAR

Reviews:

Related manuals for 7705 SAR

Brands by name

Popular brands