Alcatel-Lucent 7705 SAR-A, Installation Manual

Page: 113 / 154

Initializing and Provisioning
7705 SAR-A Chassis Installation Guide 113
Establishing Router Management Connections
There are three ways to access management of the 7705 SAR-A:
• console connection
• SSH connection
• Telnet connection
Console Connection
The Console port on the front of the 7705 SAR-A is a female RJ-45 connector (see
Figure 26 ). To establish a console connection, you need the following:
• an ASCII terminal or a PC running terminal emulation software set to the parameters
shown in
Table 26
• a shielded RJ-45 CAT5e cable
Shielded cable must be used to maintain EMC compliance.
Figure 26: Console Port Connection
Table 26: Console Port Default Settings
Parameter Value
Gender DCE
Baud Rate 115 200
Data Bits 8
Parity None
Stop Bits 1
Flow Control None
7705 SAR-A
Mgmt
ToD Out
Lnk Act
Sync In
+Batt A -Batt A +Batt B -Batt B
Console
8 12 11 10 9 7 6 5 4B 3B 2B 1B 1A
Status
2A 3A 4A
Act Lnk Act Lnk Act Lnk Act Lnk
Stat Stat Stat Stat
2 4 6 8
1 3 5 7
Lnk Act Lnk Act Lnk Act Lnk Act
Stat Stat Stat Stat
T1/E1 Ethernet
-48 VDC
23319
Console port