Alcatel-Lucent 7450 ESS Series, Configuration Manual

Page: 243 / 540

IP Router Configuration
7450 ESS OS Router Configuration Guide Page 243
Parameters
ip-address — Only displays the interface information associated with the specified IP address.
Values
ipv4-address a.b.c.d (host bits must be 0)
ip-int-name — Only displays the interface information associated with the specified IP interface name.
Values
32 characters maximum
packet
Syntax packet [ ip-int-name | ip-address ] [ headers ] [ protocol-id ]
no packet [ ip-int-name | ip-address ]
Context debug>router>ip
Description
This command enables debugging for IP packets.
Parameters
ip-int-name — Only displays the interface information associated with the specified IP interface name.
Values
32 characters maximum
ip-address — Only displays the interface information associated with the specified IP address.
headers — Only displays information associated with the packet header.
protocol-id — Specifies the decimal value representing the IP protocol to debug. Well known protocol
numbers include ICMP(1), TCP(6), UDP(17). The no form the command removes the protocol
from the criteria.
Values
0 — 255 (values can be expressed in decimal, hexidecimal, or binary)
route-table
Syntax route-table [ ip-prefix / prefix-length ]
route-table ip-prefix / prefix-length longer
no route-table
Context debug>router>ip
Description
This command configures route table debugging.
Parameters
ip-prefix — The IP prefix for prefix list entry in dotted decimal notation.
Values
ipv4-prefix a.b.c.d (host bits must be 0)
ipv4-prefix-length 0 — 32
longer — Specifies the prefix list entry matches any route that matches the specified ip-prefix and pre-
fix mask length values greater than the specified mask .