Alcatel-Lucent 7450 ESS Series, Configuration Manual, Page: 193 / 540

IP Router Configuration
7450 ESS OS Router Configuration Guide Page 193
===============================================================================
Interface Name Port Network Domain
-------------------------------------------------------------------------------
intf1 1/2/2 net1
intf2 6/1/2 net1
-------------------------------------------------------------------------------
Interfaces : 2
===============================================================================
*A:Dut-T>config>router#
*A:Dut-T>config>service# show router network-domains "net1" sdp-association
===============================================================================
SDP Network Domain Association Table
===============================================================================
SDP Id Network Domain
-------------------------------------------------------------------------------
100 net1
-------------------------------------------------------------------------------
SDPs : 1
===============================================================================
*A:Dut-T>config>service#
policy
Syntax policy [ name | damping | prefix-list name | as-path name | community name | admin ]
Context show>router
Description
This command displays policy-related information.
Parameters
name — Specify an existing policy-statement name.
damping — Specify damping to display route damping profiles.
prefix-list name — Specify a prefix list name to display the route policy entries.
as-path name — Specify the route policy AS path name to display route policy entries.
community name — Specify a route policy community name to display information about a particular
community member.
admin — Specify the admin keyword to display the entities configured in the config>router>policy-
options context.
Output Policy Output —
The following table describes policy output fields.
Label Description
Policy The policy name.
Description
Displays the description of the policy.