Alcatel-Lucent 7450 ESS Series, Configuration Manual, Page: 191 / 540

IP Router Configuration
7450 ESS OS Router Configuration Guide Page 191
neighbor
Syntax neighbor [ ip-int-name | ip-address | mac ieee-mac-address | summary ]
Context show>router
Description
This command displays information about the IPv6 neighbor cache.
Parameters
ip-int-name — Specify the IP interface name.
ip-address — Specify the address of the IPv6 interface address.
mac ieee-mac-address — Specify the MAC address.
summary — Displays summary neighbor information.
Output Neighbor Output —
The following table describes neighbor output fields.
Sample Output
B:CORE2# show router neighbor
===============================================================================
Neighbor Table (Router: Base)
===============================================================================
IPv6 Address Interface
MAC Address State Expiry Type RTR
-------------------------------------------------------------------------------
FE80::203:FAFF:FE78:5C88 net1_1_2
00:16:4d:50:17:a3 STALE 03h52m08s Dynamic Yes
FE80::203:FAFF:FE81:6888 net1_2_3
00:03:fa:1a:79:22 STALE 03h29m28s Dynamic Yes
-------------------------------------------------------------------------------
No. of Neighbor Entries: 2
Label Description
IPv6 Address
Displays the IPv6 address.
Interface
Displays the name of the IPv6 interface name.
MAC Address Specifies the link-layer address.
State
Displays the current administrative state.
Exp
Displays the number of seconds until the entry expires.
Type Displays the type of IPv6 interface.
Interface
Displays the interface name.
Rtr
Specifies whether a neighbor is a router.
Mtu Displays the MTU size.