Alcatel-Lucent 7450 ESS Series, Configuration Manual, Page: 178 / 540

Page 178 7450 ESS OS Router Configuration Guide
interface
Syntax interface [{[ ip-address | ip-int-name ] [ statistics ] [ detail ] [ family ]} | [ summary ] | [ exclude-
services ]
interface family [ detail ]]
Context show>router
Description This command displays the router IP interface table sorted by interface index.
Parameters ip-address — Only displays the interface information associated with the specified IP address.
Values ipv4-address a.b.c.d (host bits must be 0)
ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
ip-int-name — Only displays the interface information associated with the specified IP interface name.
detail — Displays detailed IP interface information.
statistics — Displays packet statistics for an interface on the router.
summary — Displays summary IP interface information for the router.
exclude-services — Displays IP interface information, excluding IP interfaces configured for customer
services. Only core network IP interfaces are displayed.
family — Specifies the router IP interface family to display.
Values ipv4 — Displays only those peers that have the IPv4 family enabled.
Values ipv6 — Displays the peers that are IPv6-capable.
Output Standard IP Interface Output — The following table describes the standard output fields for an IP
interface.
Label Description
Interface-Name
The IP interface name.
Type
n/a —
No IP address has been assigned to the IP interface, so the IP
address type is not applicable.
Pri —
The IP address for the IP interface is the Primary address on
the IP interface.
Sec —
The IP address for the IP interface is a secondary address on
the IP interface.
IP-Address
The IP address and subnet mask length of the IP interface.
n/a
— Indicates no IP address has been assigned to the IP interface.