Alcatel-Lucent 7450 ESS-7, Installation Manual

Page: 96 / 160

Configuring Chassis Slot, IOM, and MDA Parameters
Page 96 7450 ESS-7
Configuring Chassis Slot, IOM, and MDA Parameters
After the SF/CPM is installed, chassis slots, IOMs, and MDAs can be preconfigured prior to the
component installation or configured after the components are installed. Each specific slot must
specify an IOM, MDA slot, and MDA type. Ports cannot be configured until the MDA is
configured.
Preprovision components in the following order:
1. Chassis slot number
2. Card type
3. MDA slot number
4. MDA type
5. Ports
Configuring Chassis Slot and IOM Parameters
In the
config>card
context, use the following CLI commands and syntax examples to
provision the chassis slot and IOM:
Command Example
Step 1
card slot-number card 1
Step 2
card-type card-type card-type iom-20g
Step 3
no shutdown no shutdown