•
In a redundant 5620 SAM installation, the 5620 SAM Auxiliary Statistics Collector
must have IP connectivity to the 5620 SAM Server peer. If different interfaces are
used for communication to the clients and/or auxiliary servers, the IP connectivity
required to the 5620 SAM Server peer could be through the client interface (NIC 3 on
) or the database/server interface (NIC 1 on
“Distributed 5620 SAM Server/Database deployment with multiple network
interfaces” (p. 8-4)
). Therefore, routing must also exist between the client interfaces
(NIC 3 on
Figure 8-2, “Distributed 5620 SAM Server/Database deployment with
multiple network interfaces” (p. 8-4)
) on both SAM Servers and the Auxiliary
Servers.
•
Additional network interfaces may be configured on the 5620 SAM Auxiliary
Statistics Collector workstation, at the customer’s discretion, to perform maintenance
operations such as workstation backups.
•
IPv4 and IPv6 network elements can be managed from the same interface or from
separate interfaces. (NIC3 and/or NIC4 on
Figure 8-2, “Distributed 5620 SAM
Server/Database deployment with multiple network interfaces” (p. 8-4)
).
5620 SAM Auxiliary Call Trace Collector multiple IP addresses
deployment scenarios
5620 SAM Auxiliary Call Trace Collector multiple IP addresses deployment scenarios
The 5620 SAM Auxiliary Call Trace Collector supports the configuration of different IP
addresses for the following purposes:
•
One network interface can be used to retrieve information from the managed network.
(NIC 2 on
Figure 8-2, “Distributed 5620 SAM Server/Database deployment with
multiple network interfaces” (p. 8-4)
) This network interface contains the IP address
that the managed devices will use to send the call trace messages from the network
elements.
•
One network interface can be used to service the requirements of the 9958 WTA client
(NIC 3 on
Figure 8-2, “Distributed 5620 SAM Server/Database deployment with
multiple network interfaces” (p. 8-4)
). This network interface contains the IP address
that all clients will use to communicate with the 5620 SAM Auxiliary Call Trace
Collector. 9958 WTA will use this IP address to retrieve the Call Trace data from the
5620 SAM Auxiliary Call Trace Collector.
•
One network interface can be used to communicate with the 5620 SAM management
complex as well as any redundant 5620 SAM components should they be present
(NIC 1 on
Figure 8-2, “Distributed 5620 SAM Server/Database deployment with
multiple network interfaces” (p. 8-4)
). This network interface contains the IP address
that the 5620 SAM management complex components will use to communicate with
the 5620 SAM Auxiliary Call Trace Collector. If a redundant 5620 SAM Auxiliary
Deploying the 5620 SAM with multiple network
interfaces/IP addresses
5620 SAM Auxiliary Statistics Collector multiple IP addresses
deployment scenarios
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
5620 SAM
3HE-09809-AAAG-TQZZA 13.0 R7
Issue 1
December 2015
8-7
