ALC AWF13 SightHD Quick Start Up Manual Download Page 1

Front cover

BACK cover

FO  LD

FO  LD

FO  LD

Wireless Made Simple.

Let’s Get Sta

rted

Model A

WF13

LIVE VIEWING

NOTE:

 

 Avoid pointing a camera directly at any bushes or tree branches or objects that may naturally move due to winds.

APPLE REMOTE VIEWING

1
2

FREE APP DOWNLOAD

From your smart device, DOWNLOAD and INSTALL the free 

ALC SightHD App

.

Plug camera into an electrical outlet (allow the camera up to 90 seconds to boot up).

3

On your Apple device, open the Settings App. Tap Wi-Fi and under Choose A Network, select the HD-XXXXXX Network. 

4

When asked for a password, enter, “12345678”. Tap Join to connect.

5

Now Launch the ALC SightHD App and the Setup Wizard will appear.

6

Tap “          ” to start the Wizard. 

7

Once the screen indicates the camera is connected, tap Live View.

8

Once the camera is found, the screen will show a Live View briefly before moving to a set up screen.  

9

At the next screen enter a new password and remember it or write it down. Tap Wi-Fi Setting.

10

Select your home network from the menu, and then enter your home network’s Wireless Password. Tap OK.

11

The system will reboot the camera. The reboot will be complete when the App finishes counting down from 90. 
Tap still image for live video.

SightHD

APPLE DEVICE SETUP 

1

2

4

3

For detailed installation and setup, please refer to the 
Model AWF13 complete User’s Guide available on our website: 

www.ALCWireless.com/support

SCAN 

TO VIEW

COMPLETE

USER’S GUIDE

ALCWireless.com

Wireless

Made Simple.

Screw the Antenna clockwise 
into the rear of the camera.

Secure the multi-position Camera Bracket  to a stable 
surface, ceiling or wall using the two screws. If 
needed, two anchors are also included. Secure the 
camera to the Camera Bracket using the three smaller 
screws.

Connect the small end of the AC 
adapter to the camera’s AC In jack. 

Plug into electrical outlet when 
ready to install App (Step 2 in 
REMOTE VIEWING section).

Quick

Simple

Set Up

FEATURES

LIVE VIEW

Tap SETTINGs icon and then tap 
ADVANCE to see the
Advanced Feature options

• Sensitivity Setting

(Motion Recording)

• Email Setting

• SDCard Setting

• Recording Setting

1

Tap preview PICTURE

Pan and Tilt: To move 

the camera, simply 

slide your finger across 

the Android or Apple 

Device’s screen up 

and down or from side 

to side.

Tap to RETURN to the 

main page.

LIVE VIEW RECORDING

on microSD CARD*

Motion Recording

Tap to CAPTURE screen images in 

Live View.  Images automatically 

save to smartphone’s camera roll 

or gallery.

Tap to RECORD. Two-minute (approx.) 

recordings save to microSD card on the 

rear of  camera, see diagram page for 

location (microSD card not included).

NOTE:

 

 Do not submerge camera in water. STRANGULATION HAZARD: Infants have STRANGLED in power cords. Keep power cords 

more than 3 feet away from cribs. When using your equipment, always follow basic safety precautions to reduce the risk of fire, 
electric shock and injury to persons. Illustrations are for reference only. Actual product specifications may vary. 
For additional precautions and product information, please see owner’s manual at www.ALCWireless.com/support

1

2

Manually RECORD video from Live View by 
tapping Record icon.  Recording will stop 
after approximately two minutes.

To set MOTION ACTIVATED RECORDING, 
Go to 

Advanced Settings

 in App > 

SENSITIVITY SETTINGS to select options.
The Advanced Settings will ask for the 
admin password, default password is: 
123456. You can change the default 
password within the Advanced Settings.

Insert a microSD card into the rear of camera.

ADVANCED SETTINGS

microSD Card Slot*

*microSD card (not included) is 

required to record video to camera.

Camera 2 (Live Video)

Connected

Tap to set the Default Position 

or return to the Default Position.

To speak through the camera's speaker, 

using your Android or Apple device, tap 

and hold this icon and speak; 

the voice will be heard through the 

camera’s speaker.

Tap to turn volume ON/OFF in the

 Live View mode. 

720p Indoor
Pan/Tilt Wi-Fi
Camera

QUICK START GUIDE

Model AWF13

 

Tip:

  

Plan the location of 

your camera for optimal 

viewing and proximity to AC 

Power outlet.

Indoor Camera

NOTE:

 

 Avoid installing in a location which requires the wireless signal to pass through 

cement, concrete and metal structures. This will reduce the transmission range.

*microSD card (not included) is 

required to record video to camera.

Antenna

Connector

AC In Jack

Power  LED 
microSD Slot

Sensor

Internet

Jack

Reset

ANDROID REMOTE VIEWING

1

2

FREE APP DOWNLOAD

From your smart device, DOWNLOAD and 
INSTALL the free 

ALC SightHD App

.

Tap Next.

The App will start the connection process. Tap Live View.

Plug camera into an electrical outlet (allow the 
camera up to 90 seconds to boot up).

Tap Set Up Wizard            on screen for direct wireless 
connection of camera to App. 

SightHD

3

4

5

6

7

The Setup Wi-Fi Network pop up box will appear. Select your 
home network from the menu, and then enter your home 
network’s Wireless Password. Tap OK. The App will reboot 
the camera. Tap image for live video.

Smart device will scan and detect camera. Once found, 
the Change Password screen will appear. Enter a password 
and remember it or write it down for future use. Tap OK.

ANDROID DEVICE SETUP 

NOTE:

 

Screen shots and icons may vary due to continuous updates to App and software development.

To move the camera,

 simply 

slide your finger across the 

Android or Apple Device’

screen up and down or from 

side to side.

PAN & TILT

 

Remote 

Monitoring An

ytime 

fr

om An

ywher

e

Recommendations for best system performance:

•  iOS 6.0 

or above.

•  

Android:

 Android

  

   smartphone or tablet (version 2.3x or above). 

•  

Storage: 

Class 10 microSD memory card (up to 32 GB).

•  

Bandwidth:

 512Kbps or above upload/download speed suggested.

TM

Camera 2 (Live Video)

1

Select the Start and Stop date and time on the Select Event Filter and tap OK.

2
3

Tap the FILE that you want to playback from the list.

PLAYBACK

NOTE:

 

 For Apple devices tap the Search icon to bring up the Events screen.

Tap CAMERA SETTING icon            and then EVENT LIST icon

Connected

1280x720
P2P, N=1, 15.00FPS

CAMERA INSTALLATION

CAMERA INSTAL SETUP

Indoor camera 

AC power ada

pter

Internet cable

(for optional manual 

connection)

Power extension cable

Camera Bracket

IN THE BOX

Antenna

Quick Start Guide

Screw/Anchor Kit

Reviews: