digi-TV 300 Quick Start
You do not want to read the whole manual?
There is a very convenient function to start immediately with
the necessary settings. The same procedure can also be
performed if the TV set shall be used at a new location:
Reset and Installation Wizard Start (see also page 11)
•
Switch the TV set on
•
Press Menu / OK at least 5 seconds continuously
•
Highlight OK with the cursor and confirm with OK
The unit performs a factory reset to the default settings and
starts
ready with German la regional settings
•
Use the cursor buttons to select the automatic
channel search
•
Confirm every selection with OK
•
Wait some minutes until all channels are stored-
The TV set starts with the first registered channel.
