English 99
• You can turn search banks on/off by using 1-9 or 0. One search
bank must always be enabled. If you turn off all search banks, the
scanner will display
Nothing to Srch.
• If you want to change the search direction or if it is a long
transmission and you want to continue searching, turn
SCROLL
CONTROL
or press
Srch/Svc
.
Custom Search Receive/Hold Modes
To hold on a frequency, press
Hold
. To step through the frequencies,
turn
SCROLL CONTROL
in
Hold
mode. Press
Hold
to resume
searching.
While monitoring a transmission, the upper line displays the current
search bank name and the lower line displays the current frequency with
the direction indicator (↑or ↓)
The modulation,
Priority
mode icon (if priority is enabled), any
CTCSS/DCS received (if enabled), and the Close Call icon (if CC Pri or
CC-DND is enabled) will also appear in the display.
Numbers at the bottom of the display show the enabled search banks.
The currently searched bank number flashes in
Receive
mode.
• To store a frequency, press
Pgm/E
Frequencies on page 102.
• To temporarily lock out a frequency, press
L/O
.
• To permanently lock out a frequency, press
L/O
twice quickly. See
also Search Options on page 100 for Delay, CTCSS/DCS settings
and locking out/reviewing/unlocking frequencies.
Quick Search Mode
Quick Search
mode allows you to enter a frequency and start searching
up or down from that frequency from any
Hold
mode (except
Close Call
Only
).To start a Quick Search in
Scan
or
Search
mode, press
Hold
to
hold on any channel or frequency. Enter the new frequency (include a
decimal point so you don’t go to a channel) and press
Hold
again to set
the frequency.
At Quick Search, press
Hold
to start searching.