English 107
The modulation and any CTCSS/DCS received (if enabled) will also
appear on the display.
Numbers at the bottom of the display show the enabled Close
Call bands. The currently searched band number flashes.
When the transmission ends, the scanner resumes searching according
to the delay setting.
To hold on a frequency, press
Hold
.
To start a Quick Search at the current frequency, turn the
SCROLL
CONTROL
in
Hold
mode and press
Hold
to start searching.
To resume searching, turn the
SCROLL CONTROL
.
To temporarily lock out a frequency, press
L/O
.
To permanently lock out a frequency, press
L/O
twice quickly.
To store a frequency, press
Pgm/E
Frequencies on page 102.
To exit
Close Call Only
mode, press
Scan
.
The following paragraphs describe Delay, CTCSS/DCS, Alert Settings,
Setting Close Call Bands, and reviewing/unlocking frequencies.
Set Close Call Bands
This setting allows you to select the bands searched for all
Close Call
modes.
1. Press
Func
then
Hold
to view the
Close Call
menu.
2. Scroll to
Close Call Bands
and press
Pgm/E
.
3. Scroll to each band you want to enable/disable and press
Pgm/E
.
4. Scroll to select
C-Call Band On or Off
and press
Pgm/E
.
• 25- 88 VHF-Low - VHF Low Band (25 - 88 MHz)
• 108-137 Aircraft – Aircraft Band (108 - 137 MHz)
• 137-174 VHF-Hi1 - VHF High 1 Band (137 - 174 MHz)