28
English
5. Navigate through menus
At any time you can long press the MENU button to enter the
main menu Use the arrow keys ▼▲ to navigate through all
menus. Always use the OK button to confirm your selection. To
exit any menu without a selection, press or
OK
in the Station
and Favoritelist.
6. Connecting the DR 58 to your Car Stereo
6.1. Connecting via FM-Transmitter
You can choose to set the FM transmitting frequency automati-
cally or manually.
Note
: For maximum reception sensitivity certain FM ranges are
blocked. These depend on the received DAB stations.
6.1.1. Automatic frequency selection
•
Enter the
MENU
and select
Audio Out.
Now choose
FM
Transmitter
and confirm your selection.
Note:
This is the default configuration, so this step can be
skipped upon first use.
•
Press and hold
FREQ
button to show the
TX Frequency:
xxx.xMHz
at the footer and then press and hold
FREQ
again for 3 seconds to activate the automatic scanning of
a “vacant” FM transmission frequency without interference
from other channels. The scanning process will take 20-30
seconds. The display is showing “
---.-MHZ
” and stops at a
vacant frequency.
•
After a “vacant” frequency is found, press
OK
to confirm the
setting or it will automatically confirm after 3 seconds. The
selected “vacant” frequency will be shown at the header,
e.g. TX 108.0MHz
•
Then tune your car FM radio system to match the selected
FM transmitting frequency for transmission of the audio sig-
