8
29
8. USB charger socket
Your e-pilot has a USB charger socket [35] that can be used to charge devices to
a maximum of 1.3 A (e.g. mobile phones). The charger socket is located
on the head of the handlebar and it is protected by a rubber cover [36].
Ensure that the rubber cover is always fully inserted and seals the port when the USB
charger socket is not in use. If the USB charger socket is not fully sealed, moisture
can get inside and cause damage.
Caution, risk of crushing injuries!
Never reach into the cover located below the USB port [35].
Particularly when turning corners, there is a risk of crush-
ing fingers.
9. Light
The light [17] is primarily switched on and off with the button [5] on the handlebar (see
chapter 2.6). The light can also be switched on and off with the button [63] located on
the light itself.
Important notes:
The button [5] completely interrupts or opens the flow of current to the light [17].
This means that the light can only be switched on if it has already been switched on with
button [5].
Summary of Contents for e-pilot
Page 3: ......
Page 4: ...Abmessungen Akku Pack ...
